Hammer Test Proceq Original Schmidt Type N

Hammer Test Proceq Original Schmidt Type N

Hammer Test Proceq Original Schmidt Type N

TOKO MARGA SETIA SURVEY
Berdagang alat- alat Kelautan, Alat Selam, Perahu Karet,Alat Keselamatan,
GPS Garmin, GPS Magellan, Alat Survey, Alat Ukur dan Aksesoris Alat Ukur.
Current Meter.Anemometer ,Anemometer Wireless,Weather station
Untuk keterangan, nego harga dan informasi produk lainnya, hubungi :
Name       : tatang survey
Alamat      : Jl .H.Kelik No.20 RT.03 / RW.08 Kelapa Dua Kebon Jeruk Jakarta Barat
Web         : www.margasetiaonleneshoop.com
Email        : tatangms409@gmail.com
Telp          : 082124100046
WhatsApp  :082124100046

Concrete Rebound Test Hammer – Original Schmidt

The quality of concrete is mainly judged by its compressive strength directly affecting the load-bearing capacity and durability of concrete structures. Proceq invented the Original Schmidt, the world’s first and now most widely used test hammer for analyzing the compressive strength of concrete properties.

The Original Schmidt will hit the concrete at a defined energy whereas its rebound is dependent on the hardness of the concrete and is measured by the instrument. The Original Schmidt is available in models with different impact energies. Each test hammer is designed for a specific test application, in order to meet the needs of the customers to investigate a wide range of material types and sizes, such as bridge decks, thin walls, cast stone components or small components.

Features

Type N Original Schmidt: Rebound values are read from a scale for subsequent calculation of the mean. Compressive strength values  can be read from a conversion diagram

Type NR Original Schmidt: Rebound values are recorded as a bar chart on a paper strip which has a capacity for 4’000 test impacts

Type L Original Schmidt: Handling equals type N, but the type L offers an impact energy three times smaller

Type LR Original Schmidt: Handling equals type NR, but with impact energy three times smaller. The LR also features a paper strip for recording up to 4’000 test impacts without reloading

Applications

Ideally suited for on-site tests of concrete

The concrete test hammer is suitable for testing a wide variety of concrete, mortar and rock, but also for testing metal castings

Handy for difficult to access or confined test areas (i.e. working overhead)

Assessment on young, soft concrete with mushroom plunger of the concrete test hammer, eg. asphalt strength testing

It can be even used for underwater applications

Combining Methods to Evaluate Concrete Strength

Product Variations

Concrete test hammer SilverSchmidt Type ST N – Standard impact energy (2.207 Nm)

Concrete test hammer SilverSchmidt Type ST L – Reduced impact energy (0.735 Nm)

Concrete test hammer SilverSchmidt Type PC N – Standard impact energy (2.207 Nm) with PC communication, increased memory capacity and Hammerlink 

The following standards can be applied to the concrete test hammer:

EN12504-2 (European Standard)

ASTM C 805 (North American Standard)

JGJ/T 23-2001 (Chinese Standard)

Technical Data

Mechanical data	Type ST N / PC N  concrete test hammer	Type ST L / PC L  concrete test hammer
Impact energy	2.207 Nm	0.735 Nm
Hammer mass	135 g	135 g
Spring constant	0.79 N/mm	0.26 N/mm
Spring extension	75 mm (2.95”)	75 mm (2.95”)
Housing dimensions	55 x 55 x 255 mm (2.16” x 2.16” x 9.84”)
Weight	570 g (1.3 lb)

PC application
Only for the concrete test hammer SilverSchmidt versions PC N and PC L: Hammerlink Software

Electrical data
Display	17 x 71 pixels; graphic / alphanumeric
Power consumption	~13 mA measuring, ~4 mA setup and review, ~0.02 mA idle
Battery life	>5000 impacts (before recharging)
Charger connection	USB type B (5V, 100 mA)

Measuring ranges
Concrete compressive strength	10-100 N/mm2 (1450-14500 psi)
Operating temperature	0 to 50 °C (32 to 122 °F)
Storage temperature	-10 to 70 °C (14 to 158 °F)